EG4 PowerPro Battery Paralleling Cables
The EG4 PowerPro Paralleling Cables are the inter-battery DC cables and comms cables that connect EG4 PowerPro WallMount batteries into a single bank. One kit gets you the busbar jumpers, the inter-unit positive and negative cables, and the comms cable that ties the BMS units together for closed-loop communication.
- Type
- Inter-battery paralleling cable kit
- Function
- DC paralleling + closed-loop BMS comms
- Kit includes
- DC positive, DC negative, comms cable, busbar jumpers
- Compatible with
- EG4 PowerPro WallMount batteries
- Quantity needed
- One kit per battery-to-battery connection (n-1 kits for n batteries)
- Cable termination
- Pre-terminated for PowerPro lugs
About this battery
The EG4 PowerPro Paralleling Cables are the inter-battery DC cables and comms cables that connect EG4 PowerPro WallMount batteries into a single bank. One kit gets you the busbar jumpers, the inter-unit positive and negative cables, and the comms cable that ties the BMS units together for closed-loop communication.
Use these when you're stacking two or more PowerPro WallMount batteries. The cables are sized and pre-terminated for the PowerPro lugs, so you're not cutting and crimping your own. The comms link is what lets the bank report a single state-of-charge to the inverter and balance current draw across all batteries.
One kit covers one battery-to-battery connection. Order one fewer than the number of batteries in the bank (5 kits for a 6-battery bank). Plain busbars or generic copper cable can work in a pinch but don't carry the comms link the BMS needs to balance the bank.
More Batteries
EG4 Battery Cabinet 6 Slot
The EG4 6-Slot Battery Cabinet is the wall-mounted enclosure for stacking up to six EG4 rackmount batteries into a single bank. Each slot holds one 48V LiFePO4 server-rack-style battery, and the cabinet handles the cable runs, mounting points, and the side panels that keep the install looking clean. Six 100Ah batteries inside this cabinet builds out to roughly 30kWh of usable storage at 48V, which covers most whole-home backup or off-grid scenarios without needing a second cabinet. The arrangement keeps the comms and DC cabling inside the enclosure, with the inverter run out the top or bottom. Sold as the cabinet only. Batteries are sold separately. Pairs with EG4 rackmount lithium batteries like the LL-S and Lifepower4. Bolts to a wall stud and accepts batteries from the front.
$789
EG4 Battery Rack (3 Slot)
The EG4 3-Slot Battery Rack is the smaller sibling of the 6-slot cabinet. It holds up to three EG4 rackmount batteries in a server-rack format and works as a free-standing rack or wall-mounted bank for smaller off-grid and backup builds. Three 100Ah batteries inside this rack lands at roughly 15kWh of usable storage at 48V, which covers a critical-load backup or a starter off-grid bank. Step up to the 6-slot cabinet if you're sizing for whole-home backup or a longer off-grid runtime. Sold as the rack only. Pairs with EG4 rackmount lithium batteries like the LL-S and Lifepower4. Cable management runs inside the rack, with the inverter connection out the back or top.
$500